FANUC SR-3iA Standard Cover and Bellow Kit
SKU: ANU-SCK-SR3
Seals the FANUC SR-3iA SCARA robot for clean, protected operation. Engineered in partnership with FANUC, the kit uses the robot's existing assembly points for a custom fit with no drilling or modification.
- Nylon 12 upper shield with integrated pneumatic fittings for airline pass-through
- FDA approved translucent silicone bellow that seals the vertical actuating quill
- Moves with the quill through the full stroke while maintaining a sealed envelope
- Max stroke of 164 mm with only 36 mm stroke loss on the SR-3iA
- Standard and industrial kit options, validated against FANUC requirements
- Running a dusty cell? Also available with dust filters or as a custom build
Standard Clean Room
The sealed kit as standard. A Nylon 12 shield and a translucent silicone bellow seal the upper mechanism and the quill, with a single 6 mm breathing port at the top.
You are viewing this versionWith Dust Filters
For dusty cells. A filtered front plate plugs the top port and breathes through four 50 µm filters, so dust never reaches the greased quill.
View this versionCustom
Configured to your application: cover size, air fitting, cable gland and plug sizes, and a low moisture material for low dew point environments.
View this version
Clean Cells, Compact Robot
Packaging and handling in light dusty environments, electronics and plastics assembly, and food applications that require extra cleanliness around moving parts thanks to the FDA approved bellow material. Running the larger SR-6iA? The SR-6iA kit covers it.
The Sealed Kit as Standard
The standard kit seals both the upper and lower sections of the SR-3iA. A Nylon 12 shield encloses the upper mechanism and carries three pneumatic pass-through fittings, while a translucent silicone bellow seals the vertical quill through its full stroke. The cover breathes through a single 6 mm port at the top of the front plate, which suits clean room and light dust environments.
- Three pneumatic pass-through fittings, 4/6 mm, with optional communication cable fittings
- Dedicated connection for internal negative pressure
- Installs on the existing assembly points with all fasteners included
- Available as a standard or an industrial kit
- Six-month limited warranty
Technical Specifications
| Part numbers | ANU001582 (SCK-SR3-STD, standard kit) ANU001618 (SCK-SR3-IND, industrial kit) |
| Weight | approx. 900 g standard kit, approx. 940 g industrial kit |
| Pass-through ports | 3 |
| Pneumatic fittings | 4/6 mm |
| Length | 167 mm |
| Width | 99 mm |
| Height retracted | 452 mm |
| Height extended | 616 mm |
| Max stroke | 164 mm |
| Stroke loss | 36 mm |
| Bellow | FDA approved translucent silicone |
| Materials, standard kit | PA, SS, Ni, NBR, VMQ, CRM |
| Materials, industrial kit | PA, SS, Ni, NBR, VMQ, CRM, CU |
| Compatible robots | FANUC SR-3iA, SR-3iH |
| Versions | Standard clean room |
| Warranty | Six-month limited |
Weights are approximate and may vary by up to 10 percent depending on version and options. Stroke loss is based on the FANUC North America published stroke length as of 2025-06-20.
Seal your SR-3iA and keep it that way
Our standard clean room kit, ready to install on the robot's existing assembly points. Tell us your application and we will confirm the fit.
